1 6

SALI Airway Buffing Wheel Kit 8 Inch Polishing Wheel Diameter 5/8" in Arbor Hole 12 Ply for Angle Grinder with Buffing Compound Kit Used On Angle Grinder for Metal, Car, Wood, Plastic

Customers rate us 5.0/5 based on 2941 reviews.
$19.99 USD
$19.99 USD
En solde Épuisé
Expédition calculée lors du paiement.
En stock (999 unités), prêt à être expédié

Attributs du produit

  • Grit Material：Aluminum Oxide
  • Product Dimensions：8"L x 8"W
  • Brand：SALI
  • Compatible Devices：Angle Grinder
  • Grit Type：Fine

À propos de cet article

Size Information: our buffing wheels for grinders come with a diameter of approx. 8 inches, and the diameter for the center hole is about 5/8 inches, 12 layers to ensure a better effect; polishing compound comes in a bar shape with a weight of 150 g/ 5.29 ounces
Widely Applied: the airway buffing wheels and buffing compounds are suitable to polish vehicle parts, such as tanks, wheels, bumpers and so on, also suitable for metal trim, and other parts made of aluminum, brass, stainless steel, copper and so on
Reliable Quality and Good Design: these cutting buffing wheels adopt cloth of different density, 133 x 72 for the white textile, suitable for fine polishing, 133 x 104 for the yellow，blue and beige textile, suitable for coarse polishing, and the center ring is reliable for long time use
Good Design:This Airway wheels are Designed to buff longer and cooler than standard buffs. Recommended Maximum RPM Safety Limits 3004
Simple to Use: these buffing compound bars work with buffing polishing wheels, just simply turn a buffing wheel on a grinder, motor or drill, and lightly press the compound against the wheel, while the heat and friction will transfer the compound onto the polishing wheel

Paiement sécurisé avec
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • JCB
  • Maestro
  • Mastercard
  • PayPal
  • Union Pay
  • Visa

Voir les détails du produit
  • Product Details

How to use

Rotate towards oneself and run at full speed. Use polishing wax to lean against the edge of the wheel for a few seconds, so that the wax adheres to the wheel (do not place the wax on objects that have already been polished). Grasp the workpiece lightly against the wheel surface and ensure that it is below the horizontal plane of the wheel center axis, otherwise the wheel may throw the workpiece out of its hand. The correct operating method is to lightly touch the wheel surface with the workpiece and then remove the workpiece. This helps to remove sharp corners on the surface and avoid spots. Add wax if necessary, but do not overdo it. If excessive, it will cause many deep spot marks on the workpiece. If too much wax is accidentally used, use tools such as an iron brush to wipe it off and reapply if necessary. Do not force the wax onto the surface of the wheel, let the wheel rotate freely.


Advantage

It has high processing accuracy, low noise, no dust, simple operation, safety and reliability, low processing cost, and is suitable for mass production. In addition, it also has the advantages of high efficiency, simple maintenance and operation, and stable polishing effect.